Dip Switch Settings
The DIP switches are the small bank of blue or red switches on the Hamilton Upgrade Kit you received. They only affect how the unit appears on your factory screen and how it interprets touch signals. Below is the DIP switch setup chart. Hamilton always strives to pre-configure your DIP switches, and changing them from the correct settings may prevent your screen from appearing.
| Acura / Honda Model (Applied Year) | DIP Setting | Hamilton Part Number |
| Acura MDX | ||
| 2014–2017 | All Off | 16MDX-HMC-L1 |
| Acura RDX | ||
| 2016–2018 | All Off | 16MDX-HMC-L1 |
| Acura RLX | ||
| 2014–2020 | 1 On | 16MDX-HMC-L1 |
| Acura TLX | ||
| 2015–2018 | All Off | 16MDX-HMC-L1 |
| Honda Odyssey | ||
| 2014–2017 | 5 On | 16MDX-HMC-L1 |
How to Perform a DIP Switch Reset
Remove the main Hamilton power wire.
Wait 1 Minute.
Adjust the DIP switches.
Re-connect main Hamilton power wire.
Turn on Vehicle and wait 1-2 Minutes for DIP settings change to take affect.