Use this procedure if any physical buttons (Back, Home, Power, Menu, etc.) are not working as expected.
Step 1: Open Panel key learning
- Open Settings → Go to System
- Scroll down and select Learn Panel Key.
Or
- Open Settings → Go to Settings Guide → Enter password 1776 and OK
- Scroll down and select Learn Panel Key.
Step 2: Assign Buttons
- Tap the field next to the button function (e.g., Back)
- Press the corresponding physical button on the vehicle
- Confirm “Save” appears below.
Step 3: Repeat for Other Buttons
Note: Repeat the same steps for: Only if required
- Home
- Power
- Volume Up / Down
- Any other available button
Step 4: Verify
Exit settings and test all buttons.
Changes apply immediately—no reboot required.
Notes
- Useful after OTA updates or new installations
- Reassigning a button will overwrite the previous setting
- Press only one button at a time