Overview
This guide explains how to adjust the Sound Gain settings on your Subaru Conversion Kit for improved audio performance, especially for vehicles equipped with a factory amplifier.
Accessing Sound Gain Settings
- Open Settings on your device.
- Select Others.
- Locate and open Sound Gain Settings.
Recommended Bluetooth Audio Settings
For the best audio experience: Set the Bluetooth Level between 25 to 30
Recommended setting: 25 for balanced sound output
Why This Setting Matters
Adjusting the Bluetooth sound gain helps:
- Improve overall audio clarity
- Balance sound levels
- Reduce distortion
- Optimize performance with factory amplifiers
Important Note
These settings are especially helpful for vehicles with a factory amplifier installed.
If your vehicle does not have a factory amplifier, results may vary.
Recommended Setup
- Open Settings > Others > Sound Gain
- Set Bluetooth Level to:
- 25 (recommended)
- Or between 25–30 based on your preference
- Test audio playback and adjust slightly if needed
Troubleshooting
Audio Too Low
- Increase Bluetooth Level slightly above 25.
Audio Distortion or Too Loud
- Lower the Bluetooth Level closer to 25.
Uneven Sound Quality
- Restart the system after changing settings.
Tips
- Make small adjustments for best results.
- Test settings using music or audio you listen to regularly.
- Avoid setting the Bluetooth level too high, as it may cause distortion.