Hamilton Conversion Kit – Toyota Tacoma
Use this procedure if physical control buttons (Home, Maps, Phone, Mode, Brightness, Apps, Radio, Mute, etc.) are not responding correctly or require recalibration after installation or update.
Step 1: Open Panel key learning
Open Settings → Go to System
Scroll down and select Learn Panel Key
Or
Open Settings → Go to Settings Guide
Enter password 1776 and press OK
Scroll down and select Learn Panel Key
Step 2: Clear Existing Button Assignments
Select Clear to remove previous button mappings.
Confirm that all button fields are now empty or unassigned.
Step 3: Assign Each Button Function
Tap the field next to the desired function (example: Home ICON).
Press the corresponding physical button on the Hamilton Conversion Unit. (example: Home Button)
Confirm that “Successfully Set” appears on the screen.
Repeat this process for each required function: Home, Maps (NAVI), Phone, Mode, Brightness (DIMN Stands for DIM/Nightmode), Apps, Radio(FM), Mute (Press Volume Knob).
Assign only the functions necessary for your vehicle configuration.
Step 4: Save Calibration
After assigning all buttons
Select Save.